Computers and Technology, 17.02.2021 01:00 krab38

Why is it important to be a good digital citizen? 2-3 sentences

Answers: 1

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 12:20

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Answers: 3

Answer

Computers and Technology, 22.06.2019 17:00

Acase study allows a more detailed look at the life of a single subject than any other study.

Answers: 3

Answer

Computers and Technology, 22.06.2019 21:50

Given int variables k and total that have already been declared, use a while loop to compute the sum of the squares of the first 50 counting numbers, and store this value in total. thus your code should put 11 + 22 + 33 + + 4949 + 50*50 into total. use no variables other than k and total.

Answers: 2

Answer

Computers and Technology, 23.06.2019 09:30

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Answers: 1

Answer

You know the right answer?

Why is it important to be a good digital citizen? 2-3 sentences...

Questions