A computer has a cache, main memory, and a disk. If a referenced word is in the cache, 20ns are required to access it. If it is in main memory but not in the cache (called cache miss), 80ns are needed to load it into the cache (this includes the time to originally check the cache), and then reference is started again. If the word is not in main memory, 25ms are required to fetch the word from disk, followed by 80ns to copy it to the cache, and then the reference is started again. The cache hit ratio is 0.95 and the main memory hit ratio is 0.8. What is the average time in ns required to access a referenced word on this system (state the number only without the unit, round to the closest integer -- for instance of your answer is 100.7 ns, enter: 101)

Check my work the microprocessor is a(n) circuit, which is designed to process data based on a set of instructions. most desktop and laptop devices contain a microprocessor based on the standard. most tablets and smartphones contain processors based on technology. a microprocessor's circuitry is designed to perform a limited number of tasks contained in its set. during processing, an instruction is loaded into the processor's unit. data is loaded into registers in the processor's where arithmetic and logic operations are performed. microprocessor performance can be measured by its speed. other factors affecting overall processing performance include word size, cache size, and instruction set complexity. most digital devices contain only one microprocessor chip, but today's multi- processors contain circuitry that supports parallel processing. computers contain various kinds of memory. random memory is a special holding area for data, program instructions, and the system. it stores data on a temporary basis until the processor makes a data request. ram is different from disk storage because it is , which means that it can hold data only when the computer power is turned on. computers also contain read- memory, which is a type of non-volatile memory that provides a set of "hard-wired" instructions, called the loader, that a computer uses to boot up.

Apython programming question: assume s is a string of lower case characters. write a program that prints the number of times the string 'bob' occurs in s. for example, if s = 'azcbobobegghakl', then your program should print number of times bob occurs is: 2

Under the home tab, where can a user find options to change the bullet style of an outline? in the slides group in the font group in the paragraph group in the drawing group