What is the responsibility of the MAC sublayer? O Transmits the bits on the media
Adds Layer 3 address to the frame
Provides the method to get the frame on and off the media
O Communicates with the network layer (Layer 3)

Is a string of code written to hurt others by damaging or destroying

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Given int variables k and total that have already been declared, use a while loop to compute the sum of the squares of the first 50 counting numbers, and store this value in total. thus your code should put 11 + 22 + 33 + + 4949 + 50*50 into total. use no variables other than k and total.