Computers and Technology, 17.04.2021 20:00 MagicDragon4734

To answer this question, complete the lab using information below. Launch Lab You work as the IT administrator for a growing corporate network. You are in the process of creating an iSCSI storage area network (SAN) on the CorpiSCSI server. The server is currently connected to the network using an Ethernet cable. To increase the server's performance, you have decided to replace the existing Ethernet connection with a fiber optic connection. In this lab, your task is to complete the following: - Connect the CorpiSCSI server to the switch using the appropriate fiber optic cable.
Examine the port types on the switch.
Examine the server's fiber optic NIC.
When connecting the server, use the color coding on the end of the fiber optic cable to identify the Tx and Rx connection ends.
Connector A (red) is Tx.
Connector B (black) is RX.
Remove the server's previous Ethernet network connection and place the Ethernet cable on the Shelf
Verify that the server is connected to the network through the fiber optic connection. When connecting fiber optic cables, the transmit (x) port on one device is connected to the receive (Rx) port on the other device. The fiber cables in this can have already had their Rx and ty connectors switched as necessary. You can view component information in the Details window on the Specification tab.

Answers: 2

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 01:30

What kind of motivation is katrina showing? use the drop-down menu to complete the statement. katrina is using motivation because she is personally interested in learning more.

Answers: 2

Answer

Computers and Technology, 22.06.2019 02:00

Aletter or menu command that starts an action when the user presses the designated letter and the alt key together is called what?

Answers: 1

Answer

Computers and Technology, 22.06.2019 12:20

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Answers: 3

Answer

Computers and Technology, 22.06.2019 18:30

Which of the following commands is more recommended while creating a bot?

Answers: 1

Answer

You know the right answer?

To answer this question, complete the lab using information below. Launch Lab You work as the IT adm...

Questions