Aoperating system is usually used in personal computers

Howard is designing a chair swing ride. the swing ropes are 5 meters long, and in full swing they tilt in an angle of 29° outside chairs to be 2.75 m above the ground in full swing.

Knowing that the central portion of link bd has a uniform cross sectional area of 800 mm2 , determine the magnitude of the load p for which the normal stress in link bd is 50 mpa. (hint: link bd is a two-force member.) ans: p = 62.7 kn

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.