H who wnanananan be fwiends

Acomputer is a multipurpose device that accepts input, processes data, stores data, and produces output, all according to a series of stored . the processing unit of most modern computers is a(n) . the instructions that tell a computer how to carry out a task are referred to as computer , which are distributed as software. computers run three main types of software: software, system software, and development tools. an example of system software is a computer system, which is essentially the master controller for all the activities that a digital device performs. digital devices are constructed using tiny electronic components that represent data bits as electrical signals. the system unit houses the system board, which contains several circuits made from semiconducting materials. computers come in three popular form factors: component, , and slate. many of today's digital devices operate on battery power supplied by ion batteries. battery life and lifespan can be extended by following good battery management practices.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

How are stop motion special effects in animated films created