Use the drop-down menus to explain how to set up a lookup field to use a combo box control with a list of options. 1. Open a table in Design view, and right-click a field. 2. Select Change To in the drop-down menu, then select . 3. On the Data tab of the , make a number of choices. 4. For the Row Source Type, choose . 5. For Limit to List, select . 6. For Row Source, click the ellipsis and enter the values in the dialog box that opens. 7. Close the Property Sheet, and save the form.

Write a program that reads the file, then displays the average number of steps taken for each month. (the data is from a year that was not a leap year, so february has 28 days.) your program needs to use at least 3 functions not counting main and display the information in a neat well formatted fashion.

Awell-diversified portfolio needs about 20-25 stocks from different categories.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?