Computers and Technology, 28.05.2021 17:10 skylarhorse8068

You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external router to your network. Now you need to use the external router for a router-on-a-stick configuration for inter-VLAN routing between VLANs 2 and 4. Both VLANs are already configured on SwitchA and SwitchB and have interfaces assigned to the respective VLANs. Complete the following tasks: Configure GigabitEthernet 0/1 on SwitchA and GigabitEthernet 0/1 on SwitchB as trunk ports. Configure FastEthernet 0/24 on SwitchA as a trunk port. Configure the following on the external router: Enable FastEthernet 0/1 For VLAN 2, configure the following subinterface details: Subinterface: FastEthernet 0/1.2 Encapsulation: 802.1q IP address and subnet mask: 192.168.2.1 255.255.255.0 For VLAN 4, configure the following subinterface details: Subinterface: FastEthernet 0/1.4 Encapsulation: 802.1q IP address and subnet mask: 192.168.4.1 255.255.255.0 Save your changes to the startup-config file on each device.

Answers: 2

Show answers

Another question on Computers and Technology

Computers and Technology, 21.06.2019 18:30

Ayear in the modern gregorian calendar consists of 365 days. in reality, the earth takes longer to rotate around the sun. to account for the difference in time, every 4 years, a leap year takes place. a leap year is when a year has 366 days: an extra day, february 29th. the requirements for a given year to be a leap year are: the year must be divisible by 4if the year is a century year (1700, 1800, the year must be evenly divisible by 400some example leap years are 1600, 1712, and 2016.write a program that takes in a year and determines whether that year is a leap year.ex: if the input is 1712, the output is: 1712 is a leap year.ex: if the input is 1913, the output is: 1913 is not a leap year.

Answers: 2

Answer

Computers and Technology, 22.06.2019 10:00

Jackson is teaching the decimal number system. he wants his students to know how to expand numbers by powers of 10. which is the correct order in which digits are assigned values in the decimal number system?

Answers: 1

Answer

Computers and Technology, 22.06.2019 17:00

Acase study allows a more detailed look at the life of a single subject than any other study.

Answers: 3

Answer

Computers and Technology, 22.06.2019 19:00

Stacy works as blank. the most important soft skill she needs for this role is blank.

Answers: 3

Answer

You know the right answer?

You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external...