Computers and Technology, 03.06.2021 17:40 mkeyes83

A disk has 800 tracks per surface, 180 sectors per track, and 512 bytes per sector. The disk has 1 surface. The disk rotates at 5000 rpm (rotations per minute). The average seek time between random tracks is 10 ms. The seek time between adjacent tracks is 2 ms. Required:
a. Determine the total storage capacity of the disk.
b. Determine the number of seek operation to read the entire disk.
c. Determine the peak data rate of the disk (MB/second).
d. If the r/w head is at track t, how long will it take to read a sector on track t+1?

Answers: 2

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 03:30

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the â€śstub-endâ€ť fault.

Answers: 2

Answer

Computers and Technology, 22.06.2019 23:50

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Answers: 3

Answer

Computers and Technology, 23.06.2019 03:30

How can you repin an image on your pinterest pin board a. click on the "repin" button b. click on the "add pin" button c. click on the "upload a pin" button d. click on the "save pin" button.

Answers: 2

Answer

Computers and Technology, 23.06.2019 12:00

Which of these is an example of an integrated presentation? a. a table created in powerpoint b. an image pasted into powerpoint c. a caption created in powerpoint d. an excel chart pasted into powerpoint

Answers: 1

Answer

You know the right answer?

A disk has 800 tracks per surface, 180 sectors per track, and 512 bytes per sector. The disk has 1 s...

Questions