Help needed for final project: Write a program that will add two 4 digit binary numbers and yield an answer. Use the int() function to convert from binary to decimal. Display both values. The program logic must use the gate logic from the Python Logic Code: AND, OR, NOT & XOR Assignment to determine the digit outputs. The diagram below illustrates how the circuit would look for adding two-digit binary numbers.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to