Based on the code you created in this Unit, propose a way to re-use most of the code (with different information in the variables like “city” and “rates”) for a part of a similar app that isn’t related to parking at all. The app can be small-scale or large scale, but should be clearly connected to the code you’ve written (you can defend your proposal if the connection is not immediately obvious).

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.