What are the features of dot net ???​

The following is an excerpt from a slide presentation. today we will inverse operations solving equations using inverse operations solving inequalities using inverse operations from which part of the presentation does the slide most likely come from? a. introduction b. outline c. body d. conclusion

Now you’re on your own. include a short summary of this section with plots in your lab report. write a matlab script file to do steps (a) through (d) below. include a listing of the script file with your report. 1 the soundsc(xx,fs) function requires two arguments: the first one (xx) contains the vector of data to be played, the second argument (fs) is the sampling rate for playing the samples. in addition, soundsc(xx,fs) does automatic scaling and then calls sound(xx,fs) to actually play the signal. mcclellan, schafer, and yoder, dsp first, 2e, isbn 0-13-065562-7. prentice hall, upper saddle river, nj 07458. c 2015 pearson education, inc. 4 mcclellan, schafer and yoder, signal processing first. prentice hall, upper saddle river, new jersey, 2003. c 2003 prentice hall. (a) generate a time vector (tt) to cover a range of t that will exhibit approximately two cycles of the 4000 hz sinusoids defined in the next part, part (b). use a definition for tt similar to part 2.2(d). if we use t to denote the period of the sinusoids, define the starting time of the vector tt to be equal to t , and the ending time as ct . then the two cycles will include t d 0. finally, make sure that you have at least 25 samples per period of the sinusoidal wave. in other words, when you use the colon operator to define the time vector, make the increment small enough to generate 25 samples per period. (b) generate two 4000 hz sinusoids with arbitrary amplitude and time-shift. x1.t / d a1 cos.2

7. design a circuit with three inputs (x, y, and z) representing the bits in a binary number, and three outputs (a, b, and c) also representing bits in a binary number. when the input is 1, 2, or 3, the binary output should be one lesser than the input. when the input is 4, 5, or 6, the binary output should be one greater than the input. when the input is 0, the output is 0, and when the input is 7, the output is 7. show your truth table, all computations for simplification, and the final circuit.