Computer science student Jones has been assigned a project on how to set up sniffer. What must he keep in mind as part of the process? The tcpdump captures 69 bytes.
The -0 switch is needed for the full-size bytes packet.
Tcpdump handles small capture files, so a GUI-based tool will be needed.
When network 192.168.1.0/24 is displayed, eth0 is located on the second network.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.