5.3 Figure 5.16 shows a simplified timing diagram for a DRAM read operation over a bus. The access time is considered to last from t1 to t2. Then there is a recharge time, lasting from t2 to t3, during which the DRAM chips will have to recharge before the processor can access them again. a. Assume that the access time is 60 ns and the recharge time is 40 ns. What is the memory cycle time? What is the maximum data rate this DRAM can sustain, assuming a 1-bit output? b. Constructing a 32-bit wide memory system using these chips yields what data transfer rate?

What are some ways to use a range name in a formula? check all that apply. in the defined names group, click use in formula, and then select the desired name. begin typing the name in the formula, select a name from the autocomplete list, and use the arrow keys and tab key to enter the name in the formula. begin typing the formula, and then click and drag with the mouse to select the cells to include in the formula. right-click one of the cells in the range. click formula options, and use the dialog box to add the name.

What is the main benefit of minimizing the ribbon in word? more options will be accessible through customized keystrokes. more of the document will be viewable without needing to scroll. fewer controls will be accessible to the user by using the mouse. fewer editing options will be available without entering a password.

Local area networks use many of the same network technologies and the internet, only on a smaller scale. devices that access lans are equipped with a network interface that contains circuitry for wireless or wired connections. devices also have a physical address, in addition to the ip addresses acquired from a dhcp server. the most popular wired technology is . the most popular wireless technology is , which can be configured as a(n) or star topology. setting up a lan and configuring its router is fairly easy. the first step is to change the standard to one that is secure. next, create a(n) that uniquely identifies the network by name. it is also important to activate wireless to prevent wireless signals from being intercepted during transmission. a limited-access network can be created for visitors to use. by activating , the router will be able to assign ip addresses to each device that joins the network. to connect to a secure lan that is protected by encryption, an encryption , or password, is required. lans can be used to access data collected by iot devices and the networks that tie these devices together. technologies such as rfid, nfc, bluetooth smart, zigbee, and z-wave offer -power links, essential for battery-powered devices that can’t expend excess amounts of energy transmitting data.