What are LinkedIn automation tools used for?

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

While preforming before operation pmcs, you notice the front right tire appears slightly under-inflated. what is the proper action?

22. sata3 allows for data transfer rates of 600 mb/s. explain why you would likely not be able to copy data from one hard drive to another at anywhere close to this speed. also, what could be upgraded on the computer to achieve transfer speeds closer to 600 mb/s