How were online interactive games in the 1970s different from those played in 2013

Write a pseudocode solution for each of these problems. 1. design a while loop that lets that user enter a number. the number should be multiplied by 10, and the result stored in a variable named product. the loop should iterate as long as product contains a value less than 100. 2. design a do-while loop that asks the user to enter two numbers. the numbers should be added and the sum displayed. the loop should ask the user whether he or she wishes to perform the operation again. if so, the loop should repeat; otherwise it should terminate. 3. design a for loop that displays the following set of numbers: 0, 10, 20, 30, 40, 50 100. 4. design a nested loop that displays 10 rows of # characters. there should be 15 # characters in each row. 5. convert this for loop to a while loop. declare integer count for count = 1 to 50 display count end for 6. find the error in the following pseudocode. declare boolean finished = false declare integer value, cube while not finished display “enter a value to be cubed.” input value; set cube = value ^ 3 display value, “ cubed is “, cube end while

Michael has written an e-mail to his employees that describes a new product special that will be introduced to the customers next week. by taking time to make sure the e-mail is well written, logical, and organized, michael has made sure his message has the characteristics of a) effective communicationb) ineffective communicationc) barriers to communicationd) workplace communication

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.