Q1: what is significant about the contents of the destination address field?

Which of these options are the correct sequence of actions for content to be copied and pasted? select content, click the copy button, click the paste button, and move the insertion point to where the content needs to be inserted. click the copy button, select the content, move the insertion point to where the content needs to be inserted, and click the paste button. select the content, click the copy button, move the insertion point to where the content needs to be inserted, and click the paste button. select the content, move the insertion point to where the content needs to be inserted, click the copy button, and click the paste button.

Which parts of a presentation should be the most general? a. introduction and conclusion b. introduction and outline c. outline and conclusion d. outline and body

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?