Engineering, 11.07.2019 01:10 bryantjorell
Asimple brayton cycle is working under the following conditions: working fluid: air pressure ratio: 8 minimum and maximum temperatures of the cycle: 290k and 1500 k, respectively an engineer decides to double the pressure ratio and keep the maximum and minimum temperatures constant. evaluate the change in specific net work and thermal efficiency of the cycle as result of that modification. assume variable specific heat for the air.
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
Asimple brayton cycle is working under the following conditions: working fluid: air pressure ratio...
English, 24.06.2019 05:30
History, 24.06.2019 05:30
Mathematics, 24.06.2019 05:30
Biology, 24.06.2019 05:30
History, 24.06.2019 05:30
Business, 24.06.2019 05:30
Mathematics, 24.06.2019 05:30
History, 24.06.2019 05:30
Mathematics, 24.06.2019 05:30