subject
Engineering, 11.07.2019 02:20 avavackity

Calculate the increase in heat-dissipation rate which could be obtained from a cylinder wall by using four pin-shaped fins (fins are insulated at the ends) per square inch each having a diameter of 3/16 in. and a heigh ofn. assume that the heat transfer coefficient between the surface of the cylinder wall or a fin and the surrounding air is 25 btu/hr-ftf, the cylinder wall is at 600 °f, and the a 70 °f. the wall and the fins are made of aluminum

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Calculate the increase in heat-dissipation rate which could be obtained from a cylinder wall by usin...
Questions
question
Mathematics, 11.07.2019 02:00
question
Physics, 11.07.2019 02:00
question
Physics, 11.07.2019 02:00
Questions on the website: 13722367