subject
Engineering, 11.07.2019 02:30 ComicSans10

A300 mm diameter rigid cylinder contains 800 mm depth of water at the bottom, 500 mm depth of oil above the water and 200 mm of atmospheric air on top. if the air pressure is slowly increased to 1 mpa, gage, how much downward movement will occur in the air-oil interface? the values of bulk modulus are: 2050 mn/m2 for oil and 2075 mn/m2 for water.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
A300 mm diameter rigid cylinder contains 800 mm depth of water at the bottom, 500 mm depth of oil ab...
Questions
question
Mathematics, 16.10.2020 07:01
question
Mathematics, 16.10.2020 07:01
question
Chemistry, 16.10.2020 07:01
Questions on the website: 13722361