You are tasked with designing a cep cam profile for a piece of manufacturing equipment. the program should be rdfd with each event lasting 90 degrees. the peak lift should be 2". use a cycloidal function for the rise and fall events. you must submit: .an svaj diagram a cam lobe profile with a base circle of 4" .a plot of the pressure angle vs cam angle (with no eccentricity) a plot of the instantaneous pitch radius (use a 0.5" follower) a plot of the instantaneous pitch radius (use a 0.5" radius follower)

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.