Engineering, 11.07.2019 02:40 dh29229
Steam enters an adiabatic turbine at 6mpa, 600°c, and 80 m/s and leaves at 50 kpa, 100°c, and 140 m/s. if the power output of the turbine is 10 mw determine (a) the reversible power output and (b) the second-law efficiency of the turbine. assume the surroundings to be at 25°c.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
Steam enters an adiabatic turbine at 6mpa, 600°c, and 80 m/s and leaves at 50 kpa, 100°c, and 140 m/...
Questions
Chemistry, 02.09.2019 06:10
English, 02.09.2019 06:10
Biology, 02.09.2019 06:10
Computers and Technology, 02.09.2019 06:10
SAT, 02.09.2019 06:10
Mathematics, 02.09.2019 06:10
Physics, 02.09.2019 06:10
