Engineering, 11.07.2019 03:30 greciakawaii
Uppliers must be really engaged in lean philosophy for the producer to be successful. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Uppliers must be really engaged in lean philosophy for the producer to be successful. a)- true b)- f...
History, 24.09.2019 23:00
English, 24.09.2019 23:00
Mathematics, 24.09.2019 23:00
Mathematics, 24.09.2019 23:00
Social Studies, 24.09.2019 23:00
Mathematics, 24.09.2019 23:00
Mathematics, 24.09.2019 23:00
Health, 24.09.2019 23:00
Chemistry, 24.09.2019 23:00