Engineering, 11.07.2019 04:10 mlgrant6121
Suppose the fracture toughness of a titanium alloy has been determined to be 44 mpa. m2, and a penny-shaped crack of diameter 1.6 cm is present in a plate used in uniaxial tension. calculate the maximum allowable stress that can be imposed without fracture. the yield stress of the material is 900 mpa, and the plate thickness is 5 cm.
Answers: 1
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Suppose the fracture toughness of a titanium alloy has been determined to be 44 mpa. m2, and a penny...
Mathematics, 03.10.2019 01:10
Mathematics, 03.10.2019 01:10
History, 03.10.2019 01:10
Mathematics, 03.10.2019 01:10
History, 03.10.2019 01:10
Mathematics, 03.10.2019 01:10
Computers and Technology, 03.10.2019 01:10
History, 03.10.2019 01:10
History, 03.10.2019 01:10
History, 03.10.2019 01:10
English, 03.10.2019 01:10