Engineering, 11.07.2019 04:10 iilovejohnccena1022
Atensile test is carried out on a bar of mild steel of diameter 20 mm. the bar yields under a load of 80 kn. it reaches a maximum load of 150 kn, and breaks finally at a load of 70 kn. find (i) the tensile stress at the yield point (1i) the ultimate tensile stress; (iii) the average stress at the breaking point, if the diameter of the fractured neck is 10mm
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Atensile test is carried out on a bar of mild steel of diameter 20 mm. the bar yields under a load o...
Mathematics, 09.09.2021 17:30
Mathematics, 09.09.2021 17:30
Mathematics, 09.09.2021 17:30
Mathematics, 09.09.2021 17:30
Mathematics, 09.09.2021 17:30
Business, 09.09.2021 17:30
Computers and Technology, 09.09.2021 17:30
English, 09.09.2021 17:40
Mathematics, 09.09.2021 17:40