Engineering, 11.07.2019 04:10 personm21
Amaterial in the as-rolled condition has a uts of 770 mpa and a yield strength of 600 mpa. static stress concentration factor 1.2 q-1.0; factor of safety 1.75. find the cross sectional area, required if a fully reversed tensile load is applying continuously with a magnitude of+ 90 kn.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
Engineering, 06.07.2019 03:10
Different between right hand turning tool and left hand turning tool ?
Answers: 1
You know the right answer?
Amaterial in the as-rolled condition has a uts of 770 mpa and a yield strength of 600 mpa. static st...
Questions
Chemistry, 18.11.2020 16:50
