Engineering, 11.07.2019 05:10 cynthiagutierrez65
After the formation of cells is finished, a cellular manufacturing system can use either a decoupling or an integrating approach to manage the materials/product flows between individual cells. what are the decoupling and integrating approaches? what are their advantages and disadvantages?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
After the formation of cells is finished, a cellular manufacturing system can use either a decouplin...
Questions
Mathematics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
Physics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
Mathematics, 17.12.2020 01:00
