Engineering, 13.07.2019 19:10 Lovelybunny321
Oil with a density of 800 kg/m3 is pumped from a pressure of 0.6 bar to a pressure of 1.4 bar, and the outlet is 3 m above the inlet. the volumetric flow rate is 0.2 m3/s, and the inlet and exit areas are 0.06 m2 and 0.03 m3, respectively. (a) assuming the temperature to remain constant and neglecting any heat transfer, determine the power input to the pump in kw. (b) what-if scenario: what would the necessary power input be if the change in ke were neglected in the analysis? ?
Answers: 1
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
Oil with a density of 800 kg/m3 is pumped from a pressure of 0.6 bar to a pressure of 1.4 bar, and t...
English, 02.11.2020 19:10
English, 02.11.2020 19:10
History, 02.11.2020 19:10
Mathematics, 02.11.2020 19:10
Mathematics, 02.11.2020 19:10
Biology, 02.11.2020 19:10
English, 02.11.2020 19:10
Chemistry, 02.11.2020 19:10
Geography, 02.11.2020 19:10
SAT, 02.11.2020 19:10
History, 02.11.2020 19:10
Mathematics, 02.11.2020 19:10