Engineering, 17.07.2019 20:10 GaryCarmine
A70 in. long steel bar (e =30 x 10^6 psi) of rectangular cross-section 1.5 in. x 2 in. is pinned at each end. it is subjected to an axial compressive stress of 33 ksi. determine the buckling load. verify that the euler's equation is valid for the given length.
Answers: 1
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
A70 in. long steel bar (e =30 x 10^6 psi) of rectangular cross-section 1.5 in. x 2 in. is pinned at...
History, 13.10.2019 19:30
Health, 13.10.2019 19:30
History, 13.10.2019 19:30
Chemistry, 13.10.2019 19:30
Social Studies, 13.10.2019 19:30
Mathematics, 13.10.2019 19:30
Mathematics, 13.10.2019 19:30
Chemistry, 13.10.2019 19:30
Mathematics, 13.10.2019 19:30