subject
Engineering, 17.07.2019 21:10 nhester3378

Agas turbine is supplied with an ideal gas mixture having the following gravimetric analysis: 19% argon, 10% helium, and 71% neon at 500 k, and 0.3 mpa. products exit the turbine at 350 k, and 0.11 mpa. assuming an isentropic turbine, what is the work developed by the turbine per kilogram of gas mixture?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
question
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
Agas turbine is supplied with an ideal gas mixture having the following gravimetric analysis: 19% a...
Questions
question
Mathematics, 08.01.2021 04:20
question
Mathematics, 08.01.2021 04:20
question
Mathematics, 08.01.2021 04:20
question
Health, 08.01.2021 04:20
Questions on the website: 13722367