Engineering, 18.07.2019 18:20 FailingstudentXD
It is correct to use thermal resistances for a material with heat generation. a)true b) false
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
It is correct to use thermal resistances for a material with heat generation. a)true b) false...
Questions
Mathematics, 29.08.2019 12:30
English, 29.08.2019 12:30
Health, 29.08.2019 12:30
History, 29.08.2019 12:30
History, 29.08.2019 12:30
Biology, 29.08.2019 12:30
Mathematics, 29.08.2019 12:30
History, 29.08.2019 12:30
English, 29.08.2019 12:30
History, 29.08.2019 12:30
Biology, 29.08.2019 12:30
Mathematics, 29.08.2019 12:30
