Engineering, 18.07.2019 19:30 sethjohnson386pbnm3x
One steel cylinder is shrunk onto another. the compound cylinder has an inside diameter of 120mm, an outside diameter of 240mm and a diameter of 180mm at the surface of contact. the shrinkage produces a radial pressure p at the surfaces in contact. after the compound cylinder is subjected to an internal pressure pi, find the ratio of p to pi so that the maximum hoop stress in the two cylinders would be the same.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
One steel cylinder is shrunk onto another. the compound cylinder has an inside diameter of 120mm, an...
Questions
Mathematics, 10.11.2020 20:10
English, 10.11.2020 20:10
Mathematics, 10.11.2020 20:10
English, 10.11.2020 20:10
English, 10.11.2020 20:10
Advanced Placement (AP), 10.11.2020 20:10
