Engineering, 19.07.2019 20:20 mayamcmillan11
A100-mm-diametre shaft is subjected to a 10-kn. m steady bending moment, an 8-kn. m steady torque, and a 150-kn axial force. the yield strength of the shaft material is 600 mpa. use the tresca and the von mises theories to determine the safety factors for the given loadings.
Answers: 3
=101.91 MPa (M=10 KN-m)
=40.76 MPa (T=8 KN-m)
=19.23 MPa
Another question on Engineering
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
A100-mm-diametre shaft is subjected to a 10-kn. m steady bending moment, an 8-kn. m steady torque, a...
Questions
Chemistry, 09.09.2020 22:01
Mathematics, 09.09.2020 22:01
Computers and Technology, 09.09.2020 22:01
Mathematics, 09.09.2020 22:01
Computers and Technology, 09.09.2020 22:01
Computers and Technology, 09.09.2020 22:01
Geography, 09.09.2020 22:01
Health, 09.09.2020 22:01
