Engineering, 19.07.2019 21:30 monei1998
An ideal diesel engine uses air as the working fluid. the volume of the cylinder is 1200 cmº at the beginning of the compression process, 75 cm at the end, and 150 cm after the heat-addition process. the state of air at the beginning of the compression process is 100 kpa and 17 °c. determine (a) the pressure at the beginning of the heat-rejection process, (b) the network per cycle, and (c) the mean effective pressure.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
You know the right answer?
An ideal diesel engine uses air as the working fluid. the volume of the cylinder is 1200 cmº at the...
Questions
Mathematics, 09.02.2021 20:00
Mathematics, 09.02.2021 20:00
Mathematics, 09.02.2021 20:00
Mathematics, 09.02.2021 20:00
English, 09.02.2021 20:00
English, 09.02.2021 20:00
Mathematics, 09.02.2021 20:00
Mathematics, 09.02.2021 20:00
