Engineering, 19.07.2019 23:30 mikayleighb2019
For a cylindrical s-590 specimen (animated figure 8 32) originally 11 mm in diameter and 518 mm long, what tensile load (in n) is necessary to produce a total elongation of 4.0 mm after 1500 hours at 815°c? assume that the sum of instantaneous and primary creep elongations is 0.76 mm.
Answers: 2
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
For a cylindrical s-590 specimen (animated figure 8 32) originally 11 mm in diameter and 518 mm long...
Spanish, 01.12.2020 06:00
History, 01.12.2020 06:00
Mathematics, 01.12.2020 06:00
Business, 01.12.2020 06:00
Biology, 01.12.2020 06:00
Physics, 01.12.2020 06:00
Biology, 01.12.2020 06:00
History, 01.12.2020 06:00
Mathematics, 01.12.2020 06:00
Advanced Placement (AP), 01.12.2020 06:00
History, 01.12.2020 06:00
Physics, 01.12.2020 06:00