subject
Engineering, 20.07.2019 00:30 megamorph

In a horizontal pipeline a 150 mm diameter pipe is connected to a 250 mm diameter pipe. the flow rate in the pipeline is 0.15 m^3/s. take the connection as a sudden enlargement and determine: (a) the pressure head loss vhen the vater flovs from the large pipe to the smaller pipe (take cc=0.64) (b) the pressure head loss when vater flovs from the small pipe to the larger pipe (c) the loss of power in both cases

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 06.07.2019 03:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 1
question
Engineering, 06.07.2019 04:20
An insulated tank truck containing 50,000 pounds of double-distilled, deionized water at 30 °c is pumped into a closed, refrigerated storage tank maintained at 5 °c in a facility located on top of mount mitchell, north carolina (elevation 6,684 feet & average july temperature of 84 °f). a)-determine the volume of the storage tank required to hold the purified water. b)- determine the initial and final pressure differences that must be overcome by a liquid pump assuming the storage tank initially contains air at 5 °c. assume the air is slowly bled out of the storage tank during the water transfer c.) during a routine operation today, the tank is slightly ruptured by a stainless steel pipe and a water acrosol of droplets begins to spray out of the storage tank. state all assumptions and determine the internal pressure within the water droplets produced
Answers: 1
question
Engineering, 06.07.2019 04:20
Assume that you are asked to perform a boring operation on a large-diameter hollow workpiece. would you use a horizontal or a vertical boring mill?
Answers: 3
You know the right answer?
In a horizontal pipeline a 150 mm diameter pipe is connected to a 250 mm diameter pipe. the flow rat...
Questions
question
Mathematics, 26.01.2021 19:00
question
English, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
question
Mathematics, 26.01.2021 19:00
question
English, 26.01.2021 19:00
Questions on the website: 13722363