subject
Engineering, 20.07.2019 03:30 taryn1932

Water is the working fluid in an ideal (so compression and expansion processes are isentropic) regenerative rankine cycle with one closed feedwater heater. superheated vapor enters the turbine at 12mpa, 480°c, and the condenser pressure is 6 kpa. steam expands through the first-stage turbine where some is extracted and diverted to a closed feedwater heater at 0.7 mpa. condensate drains from the feedwater heater as saturated liquid at 0.7 mpa and is trapped into the condenser. the feedwater leaves the heater at 10 mpa and a temperature equal to the saturation temperature at 0.7 mpa. the flow rate of steam entering the first-stage turbine is 45 kg/s. determine the magnitude of the rate of heat transfer from the working fluid passing through the condenser to the cooling water, in mw.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
You know the right answer?
Water is the working fluid in an ideal (so compression and expansion processes are isentropic) regen...
Questions
question
Mathematics, 18.10.2019 11:30
question
History, 18.10.2019 11:30
Questions on the website: 13722359