Engineering, 26.07.2019 16:20 abbeyeasterwood
Put the four main steps of the injection molding process in correct order. (place the correct step number after the text line) a)- injection of plastic with hydraulic ram b)-final part inspection for dimensional accuracy c)- pre-heat and mixing of plastic pellets with screw d)- removal of part for cooling e)- clamping (closing) of mold -
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
You know the right answer?
Put the four main steps of the injection molding process in correct order. (place the correct step n...
Questions
Mathematics, 27.07.2019 23:30
History, 27.07.2019 23:30
Mathematics, 27.07.2019 23:30
Mathematics, 27.07.2019 23:30
Chemistry, 27.07.2019 23:30
Mathematics, 27.07.2019 23:30
Mathematics, 27.07.2019 23:30
Mathematics, 27.07.2019 23:30
Computers and Technology, 27.07.2019 23:30
