Engineering, 26.07.2019 17:10 jayzie1728

Asingle-thread steel worm rotates at 180.64 rad/s, meshing with a 24-tooth worm gear trans mitting 0.7457 kw to the output shaft. the worm pitch diameter is 3 in and the tangential diametral pitch of the gear is 4 teeth/in. the normal pressure angle is 14.5. the ambient temperature is 294.26 k. the application factor is 1.25 and the design factor is ; gear face width is 12.7 mm, lateral case area 5483.86 cm2, and the gear is chill-cast bronze. (a) find the gear geometry (b) find the transmitted gear forces and the mesh efficiency (c) is the mesh sufficient to handle the loading? (d) estimate the lubricant sump temperature.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

Asingle-thread steel worm rotates at 180.64 rad/s, meshing with a 24-tooth worm gear trans mitting 0...

Questions