Engineering, 26.07.2019 17:10 kohat485
It is appropriate to use the following yield or failure criterion for ductile materials: (a) maximum shear stress or tresca criterion; (b) distortion energy or von mises criterion; (c) mohr-coulomb criterion; (d) any of the above.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
It is appropriate to use the following yield or failure criterion for ductile materials: (a) maximu...
Mathematics, 24.03.2020 22:30
Social Studies, 24.03.2020 22:30
Health, 24.03.2020 22:31
Mathematics, 24.03.2020 22:31
Mathematics, 24.03.2020 22:31
Mathematics, 24.03.2020 22:31