Engineering, 26.07.2019 18:20 tonehasarathi
Ashaft is loaded in 2kn tension and 100nm torsion. the shaft is made of steel with a 15mm diameter. a. draw the free body diagram for the loading as described. b. determine the normal stress from tension determine the maximum shear stress from torsion d. draw the 2d stress element for the combined load e. determine the maximum normal stress and principal stresses
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Ashaft is loaded in 2kn tension and 100nm torsion. the shaft is made of steel with a 15mm diameter....
Questions
Health, 17.03.2020 18:19
History, 17.03.2020 18:20
Mathematics, 17.03.2020 18:20
English, 17.03.2020 18:20
Mathematics, 17.03.2020 18:21
Arts, 17.03.2020 18:21
Mathematics, 17.03.2020 18:21
English, 17.03.2020 18:21
Mathematics, 17.03.2020 18:21
