Engineering, 26.07.2019 19:10 manlycool7543
Ahollow aluminum cylinder made of 2014-t4 has an outside diameter of 2.50 in. and a wall thickness of 0.085 in. its length is 14.5 in. what axial com- pressive force would cause the cylinder to shorten by 0.005 in.? what is the resulting stress in the aluminum?
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Ahollow aluminum cylinder made of 2014-t4 has an outside diameter of 2.50 in. and a wall thickness o...
Spanish, 10.11.2020 21:40
History, 10.11.2020 21:40
English, 10.11.2020 21:40
Mathematics, 10.11.2020 21:40
Social Studies, 10.11.2020 21:40
Mathematics, 10.11.2020 21:40
Physics, 10.11.2020 21:40
Chemistry, 10.11.2020 21:40