subject
Engineering, 26.07.2019 19:10 uglybruja81

Consider an open loop 1-degree-of-freedom mass-spring damper system. the system has mass 4.2 kg, and spring stiffness of 85.9 n/m, and damping coefficient of 1.3 n. s/m. what is the non-dimensional damping ratio of the system? use at least 4 significant digits after the decimal point.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 19:20
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
question
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
question
Engineering, 06.07.2019 04:10
Steam enters a converging nozzle at 3.0 mpa and 500°c with a negligible velocity, and it exits at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: is isentropic (a) (b) has an efficiency of 94 percent
Answers: 1
You know the right answer?
Consider an open loop 1-degree-of-freedom mass-spring damper system. the system has mass 4.2 kg, and...
Questions
question
History, 07.11.2020 06:30
question
Biology, 07.11.2020 06:30
Questions on the website: 13722367