Engineering, 26.07.2019 19:20 WallaceHarrison123

Amultiple disk clutch, steel on bronze, is to transmit 5 hp at 750 rpm. the inner radius of contact is 1.5 in and the outer radius of contact is 2.75 in. the clutch operates in oil with an expected coefficient of friction 0.10. (oil is used to give smoother engagement, better dissipation of heat, even though the capacity is reduced.) the average allowable pressure. is 50 psi, maximum. (how design pressures are used to provide for sufficient size to give yood heat dissipation capacity.) assuming uniform wear, determine the following: a) how many total dishes of sted and bronze are required? b) what axial force is required? c) what is the average pressure?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

You know the right answer?

Amultiple disk clutch, steel on bronze, is to transmit 5 hp at 750 rpm. the inner radius of contact...

Questions