subject
Engineering, 26.07.2019 20:20 yvettegonzalez3390yg

Acan of soda is initially at a uniform temperature of 3°c. the aluminum can is 12.5-cm high and has a diameter of 6 cm. the thickness of the can wall is 0.11 mm. the combined convective and radiative heat transfer coefficient between the can and the surrounding air of 25°c is 10 w/m2 · k. (a) determine the overall heat transfer coefficient, assuming the heat transfer from the bottom of the can is negligible. (b) estimate how long it will take for the average temperature of the soda to rise to 10°c, assuming the heat transfer rate is constant at its initial value. (c) in order to slow the warming of the soda, the soda is placed in a 1-cm thick cylindrical koozie (k = 0.13 w/m · k). estimate how long it will now take for the average temperature to rise to 10°c, recognizing that the top of the can is not covered.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Acan of soda is initially at a uniform temperature of 3°c. the aluminum can is 12.5-cm high and has...
Questions
question
Chemistry, 05.05.2020 06:03
question
Mathematics, 05.05.2020 06:03
question
Mathematics, 05.05.2020 06:03
question
Spanish, 05.05.2020 06:03
question
Mathematics, 05.05.2020 06:03
question
Mathematics, 05.05.2020 06:03
question
Computers and Technology, 05.05.2020 06:03
question
History, 05.05.2020 06:03
Questions on the website: 13722361