Engineering, 30.07.2019 01:20 victoriay3
2. a rectangular plate of width 50 mm and thickness 10 mm has a centrally located hole of diameter 15 mm. calculate the maximum stress at a point on the hole if the internal bending moment at the cross section is known to be 45 n. m. round-up your answer to the nearest mpa.
Answers: 2
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
2. a rectangular plate of width 50 mm and thickness 10 mm has a centrally located hole of diameter 1...
Mathematics, 01.08.2020 21:01
Law, 01.08.2020 21:01
Health, 01.08.2020 21:01
Mathematics, 01.08.2020 21:01