Engineering, 02.08.2019 11:10 treway3982

1.technician a says that while a pre-existing hole can be
a while a pre-existing hole can be enlarged using a drill bit, a reamer
can produce a hole that is smoother and more accurate in size.
smoother and more accurate in size. technician b says that tube
fittings are best removed and replaced using a ratcheting box-end
id replaced using a ratcheting box-end wrench. who is right? explain.
2. technician a says flasher modules must be used with a scan tool. technician b says that a
handheld engine analyzer can typically retrieve trouble codes, perform tests on the computer
system, and even analyze ignition and fuel injection systems. who is right? explain.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

You know the right answer?

1.technician a says that while a pre-existing hole can be
a while a pre-existing hole can be en...