Engineering, 07.08.2019 02:30 20009
Suppose that the fatigue data for the brass alloy in problem 8.22 (previous problem) were taken from bending-rotating tests, and that a rod of this alloy is to be used for an automobile axle that rotates at an average rotational velocity of 1800 revolutions per minute. give the maximum torsional stress amplitude possible for each of the following lifetimes of the rod: (a) 1 year, (b) 1 month, (c) 1 day, and (d) 1 hour
Answers: 1
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Suppose that the fatigue data for the brass alloy in problem 8.22 (previous problem) were taken from...
Mathematics, 03.02.2020 01:48
History, 03.02.2020 01:48
Mathematics, 03.02.2020 01:48
History, 03.02.2020 01:48
Social Studies, 03.02.2020 01:48
Computers and Technology, 03.02.2020 01:48
Social Studies, 03.02.2020 01:48
Mathematics, 03.02.2020 01:48
Mathematics, 03.02.2020 01:48
Health, 03.02.2020 01:48
Biology, 03.02.2020 01:48
Mathematics, 03.02.2020 01:48