subject
Engineering, 07.08.2019 04:30 smartgirl2092

Anuclear reactor fuel tank consists of a metallic uranium cylinder 0.65" in diameter with an aluminium cladding of 1/20" thick. this fuel element is then placed axially in a cylindrical channel 1.73" in radius. what is the cross-sectional area in si units through which coolant can flow?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Anuclear reactor fuel tank consists of a metallic uranium cylinder 0.65" in diameter with an alumini...
Questions
question
Computers and Technology, 23.08.2019 23:20
question
Mathematics, 23.08.2019 23:20
Questions on the website: 13722367