Engineering, 07.08.2019 04:30 nila49
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and was reached duing the tensile test of this steel. 4, the diameter at fracture was 9.27 mm, calculate the maximum tensile load (kn) that during the tensile test of this steel.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and w...
Questions
Mathematics, 26.01.2021 03:50
Advanced Placement (AP), 26.01.2021 03:50
Mathematics, 26.01.2021 03:50
English, 26.01.2021 03:50
Mathematics, 26.01.2021 03:50
Mathematics, 26.01.2021 03:50
Mathematics, 26.01.2021 03:50
Mathematics, 26.01.2021 03:50
Medicine, 26.01.2021 03:50
Chemistry, 26.01.2021 03:50
